Gas & electric dryers · Puyallup, WA
Dryer Repair in Puyallup, WA
Get laundry day back on track.
A dryer that runs cold, won't tumble, won't start, or leaves towels damp after a full cycle can back up a whole household fast. Titan Appliance Service looks at what your dryer is actually doing, finds the cause, and talks the repair through with you before any work begins.
Tell us what your dryer is doing.
Common dryer problems
What is your dryer doing?
Find the symptom closest to yours. When you call, describing it this way helps the conversation start in the right place.
-
Dryer runs but does not heat.
The drum turns and the timer counts down, but the air stays cool. On an electric dryer the cause may sit in the heating circuit or its safety controls; on a gas dryer it may involve ignition or the gas valve components. Limited airflow and control faults can also play a part.
-
Clothes need more than one cycle.
Some heat, but not enough to finish the load. Weak heat output, a sensor that ends the cycle early, or restricted exhaust airflow can all leave clothes damp at the end.
-
Dryer will not start.
Nothing happens when you press start, or the panel lights up and the motor stays quiet. Door switches, controls, thermal safeties, and the motor circuit are among the possibilities.
-
Drum will not turn.
You may hear the motor hum, or nothing at all, while the drum sits still. Drive parts such as the belt, pulleys, rollers, or the motor itself are typical areas to check.
-
Dryer squeaks, thumps, or grinds.
New noises usually point to wear in moving parts: drum supports, glides, an idler pulley, or the blower. The sound itself is a useful clue, so note when it happens.
-
Dryer stops before the cycle finishes.
It starts normally and then shuts off partway through. Overheating protection, motor issues, sensors, or control faults can each cause a cycle to end early.
-
Dryer gets excessively hot.
The cabinet is hot to the touch or clothes come out scorching. Restricted airflow and temperature control problems are common contributors and should be looked at promptly.
Similar symptoms can have different causes. A dryer that won't heat, for example, does not always need a new heating element. That's why the dryer is diagnosed first, so the repair addresses the actual fault rather than a guess.
Safety noteIf you notice a burning smell or excessive heat, stop using the dryer until the problem is checked.
Gas and electric dryer repair
Two ways to make heat. Same goal: dry clothes.
Both types tumble clothes through warm moving air. The difference is where the heat comes from, and that shapes where a diagnosis starts.
Type A
Electric dryers
Electric dryers run on a dedicated 240-volt circuit and create heat with an electric heating element. When heat goes missing, the element, thermal fuses, thermostats, and the controls that switch power to them are all part of the picture.
Type B
Gas dryers
Gas dryers use a burner to make heat and a standard outlet for the motor and controls. An igniter lights the burner and valve components control the flame, so ignition is a key area when a gas dryer stops heating.
- Heating
- Ignition
- Drum movement
- Controls
- Airflow
Why airflow matters
A dryer needs to push moist air out through its exhaust. When the lint path or vent is restricted, moisture lingers, cycles run longer, and the dryer can run hotter than it should. Restricted exhaust airflow can contribute to both poor drying and overheating, and it's something worth mentioning when you call.
Please note: this service covers the dryer itself. Dryer vent cleaning, gas line or piping work, and household electrical work are not included. If one of those is needed, you'll want an appropriate specialist.
What happens when you call
Three steps. No surprises.
A practical conversation first, then a diagnosis, then a repair you've agreed to.
-
Step 01
Describe the symptoms
Tell us what the dryer is doing, or not doing. Share the brand and model number if you have it handy.
-
Step 02
Talk through scheduling
Discuss service availability for your address and settle the appointment details.
-
Step 03
Diagnosis, then decision
The problem is diagnosed and the repair is discussed with you before you authorize any work.
Local service
For laundry rooms across Puyallup.
Whether you're in an older home a few blocks from downtown Puyallup or a newer build up on South Hill, a stalled dryer means the same thing: wet laundry piling up and a week that's harder than it needs to be.
Western Washington's damp months make a working dryer less of a convenience and more of a necessity. Titan Appliance Service provides in-home dryer repair for Puyallup homeowners. Give us a call to confirm service at your address.
Confirm service: 360-324-5550Frequently asked questions
Straight answers about dryer repair.
Why is my dryer running but not heating?
Several things can cause it. On electric dryers, possibilities include the heating circuit, thermal fuses, thermostats, or controls. On gas dryers, ignition and gas valve components are common suspects. Restricted airflow can also trip safety devices. A diagnosis identifies which one applies to your dryer.
Why do clothes take two cycles to dry?
Usually the dryer is producing too little heat, ending cycles too soon, or struggling to move moist air out. Restricted exhaust airflow is a frequent contributor, but heat and sensor problems can look the same from the outside.
Can a noisy dryer be repaired?
Often, yes. Squeaks, thumps, and grinding typically come from worn moving parts such as rollers, glides, pulleys, or the blower, which are generally replaceable. The right fix depends on what's found during diagnosis.
Do you repair gas and electric dryers?
Yes. Titan Appliance Service works on both gas and electric dryers. Gas line work and household electrical work are not part of dryer repair.
Is my dryer worth repairing?
It depends on the diagnosis, the dryer's age and overall condition, and the cost of the repair. Once the problem is identified, you'll have the information you need to decide whether repair makes sense for you.
What information should I have when I call?
A description of what the dryer is doing, whether it's gas or electric, and the brand and model number if you can find them. The model tag is often inside the door opening or on the back panel. Have your service address ready so availability can be confirmed.
Dryer trouble? Let’s talk.
Call and describe what's happening: no heat, no tumble, strange noise, or a cycle that won't finish. We'll take it from there.
Call for Dryer Repair 360-324-5550